Light Green Glass Blowing Goggles RK2

Durable, lightweight nylon with a smooth surface that is easy to clean, stain-resistant, and built to withstand daily wear in medical environments.

Durable, lightweight ripstop nylon with a reinforced weave that resists tearing and abrasion, offering long-lasting performance and a clean, professional appearance for daily use.

Polytron is the lightest-weight fabric we offer, featuring a polyurethane coating on a semi-stretch base material. It has a satin-smooth feel, is water-resistant, resists stains, and is easy to clean—providing durability and comfort for daily use.

PVC EasyClean is an extremely durable, washable fabric that is water-resistant and easy to wipe down. Slightly stiffer than nylon, it is ideal for environments where aprons require frequent cleaning and disinfection.

GENERAL MEASUREMENTS

1. CHEST Measure the circumference under your arms around the widest part of your chest.
2. WAIST Measure the circumference around the narrowest part of your waist.
3. HIPS Measure the circumference around the widest part of your hips, keeping your feet close together.

ONE PIECE APRON

• Measure the length from the highest point of your trapezius to the top of your knee.

GENERAL MEASUREMENTS

1. BUST Measure the circumference under your arms around the widest part of your chest.
2. WAIST Measure the circumference around the narrowest part of your waist.
3. HIPS Measure the circumference around the widest part of your hips, keeping your feet close together.

TWO PIECE APRON

1. VEST Measure the length from the highest point of your trapezius to 2” below your waist.
2. SKIRT Measure the length from your waist to the top of your knee.

NECK CIRCUMFERENCE

Measure the circumference around the base of the neck, where the collar of a shirt would sit.

• Use a soft measuring tape.
• Keep the tape snug but not tight.
• Ensure it stays level around the entire neck.
• Take measurements while standing upright and facing forward.

TIPS FOR MEASUREMENT

• Measure while standing upright and looking straight ahead.
• Take measurements over the clothing typically worn under the shield.

At Phillips Safety, we offer both traditional leaded cores and our advanced Axion Core™ lead-free materials, giving medical professionals a full range of radiation protection options.

Lightweight Lead Core

For decades, lightweight lead has been the industry standard in radiation protection. Known for its durability, affordability, and proven shielding performance, it is a reliable choice for facilities seeking trusted, cost-effective radiation safety.

Axion Core™ Lead-Free Radiation Aprons and Garments

Phillips Safety introduces Axion Core™, our next-generation line of lead-free radiation aprons and garments. Engineered with a proprietary blend of bismuth, antimony, and rare earth elements, Axion Core™ delivers the lightest cores available today while meeting the highest shielding standards. Medical professionals can select the perfect balance of comfort, durability, and performance with three options.

Axion Core™ Options

• Axion Core™ 1000
  • Most economical lead-free option
  • Roughly 5% lighter than traditional lightweight lead cores
  • Heaviest non-lead core in our lineup, built for cost-efficiency without sacrificing safety
• Axion Core™ 2000
  • Most popular core among professionals
  • Significant weight reduction vs. both lead aprons and Axion Core 1000
  • Delivers an ideal balance of comfort and value, perfect for extended wear
• Axion Core™ 3000
  • Lightest lead-free core available in the Phillips line
  • Represents an engineering breakthrough, among the lightest in the industry
  • Provides unmatched comfort and long-term durability during long procedures

Lead equivalency is how well an apron blocks radiation compared to a specific thickness of lead. To pick the right one, you must match the material to your distance from the X-ray source.

• 0.25 mm Pb (1-Meter Apron): Use only if you can maintain a 1-meter (3-foot) distance.
  Safety: At 1 meter, it provides a lower dose (7.5 uSv) than a .5mm apron used up close (14.0 uSv).
• 0.35 mm Pb 1-Meter Apron): Use only if you can maintain a 1-meter (3-foot) distance.
  Safety: At 1 Meter, it provides the lowest dose (5.8 uSv) for distanced workers.
• 0.50 mm Pb (Proximity Apron): necessary standard for table-side work or being within 0.5 meters of the source.
  Safety: Offers the highest attenuation (96.5%) against high-intensity scatter.
  Usage: Best for general clinical use when you cannot step back.

Choose how your thyroid shield connects to your lead apron (or stays standalone). The tether does not change radiation protection—it’s about organization and workflow.

Untethered (No Tether)
Wear and store the shield separately. Lowest snag risk and nothing attached to the apron. Good if you rotate between multiple aprons or prefer separate storage.

Buckle Tether
An adjustable strap with a quick-release buckle that clips to an apron loop/strap. Keeps the shield with the apron during use and storage; fast on/off between cases. Best for shared aprons or high-turnover rooms.

Ring Tether
A reinforced D-ring for clipping or hanging (carabiner, hook, or existing apron hardware). Simple and durable; ideal if you hang shields on a wall rack or want a fixed attachment point. Requires a clip/hook for use.

Which should I choose?

• Prefer minimal hardware → Untethered
• Want the shield to travel with the apron → Buckle
• Hang gear on racks or use carabiners → Ring

Notes: Follow your facility’s policy on attachments and snag hazards. Tethers are not load-bearing; don’t carry the shield by the tether alone. Clean/disinfect hardware per your normal protocol.

A buckle tethered thyroid shield is a small connector designed to keep the thyroid shield and lead apron together when not in use. It uses a ½-inch black plastic side-release buckle, with the male end attached to the thyroid shield and the female end attached to the apron. This simple system helps prevent the thyroid shield from being misplaced and ensures it stays conveniently paired with the correct apron for easy storage and access.

A ring tether for a thyroid shield is a simple connector made from two heavy-duty metal key rings. One ring attaches to the thyroid shield and the other to the lead apron, allowing the two to stay connected when stored or hung. The ring tether helps prevent the thyroid shield from being misplaced and ensures it remains paired with the correct apron, without affecting the function or comfort of either item during use.

Pick how the shield fastens. Protection is the same—this is about fit and workflow.

Velcro (Hook & Loop)
Most adjustable and forgiving. Quick to fine-tune over scrubs/lead; easy, glove-friendly; simple to replace. Best for shared shields or changing layers.

Magnetic
Fast, quiet, and self-aligning. Even pressure, easy on/off with gloves. Best for speed and comfort. (Confirm facility policy near MRI.)

Buckle
Rugged, wipe-clean hardware that locks in and stays put. Consistent fit once set. Best for heavy use and “set-and-forget” reliability.

Quick pick: Adjustability → Velcro | Speed/quiet → Magnetic | Durability → Buckle

The standard Velcro closure features a wide, adjustable strap that secures comfortably behind the neck. It allows for a snug, customized fit and quick fastening or removal. This is the most common closure style, offering reliability, simplicity, and easy adjustment for different users.

The plastic side-release buckle closure uses a durable black plastic buckle positioned at the back of the neck for secure fastening. It provides a quick click-to-close and squeeze-to-release design, making it easy to use with gloved hands while maintaining a consistent fit every time.

The magnetic closure uses an integrated magnet system for effortless connection and release at the back of the neck. This premium design eliminates the need for manual alignment, allowing the shield to snap securely into place. It’s ideal for users seeking maximum convenience and comfort without compromising hold.

The AxiGuard provides targeted radiation protection for the underarm area, helping shield a critical region that may be left exposed by standard lead aprons. Worn comfortably beneath an existing radiation apron, AxiGuard adds an extra layer of protection without restricting movement, making it ideal for healthcare professionals performing radiation-intensive procedures.

Designed to fit comfortably under most lead aprons, AxiGuard features a front Velcro closure that allows for quick, easy adjustment and a secure, personalized fit. Available in seven sizes ranging from XS to 3XL, its lightweight construction provides dependable axillary coverage while maintaining freedom of movement throughout the workday.

Suitable for both men and women, the AxiGuard is available in Axion Core™ 3000. It offers 0.50 mm Pb lead equivalency for reliable radiation protection in high-exposure environments.

✓2-Year Warranty – Radiation protection apparel is covered against manufacturing defects.

The AxiShield provides targeted radiation protection for the underarm area, helping shield a critical region that may be left exposed by standard lead aprons. Using a Velcro attachment, it secures directly to the lead apron to provide secure, dependable axillary coverage.

Designed to integrate with any lead apron, the AxiShield provides additional protection while maintaining comfort and freedom of movement throughout the workday. Its simple attachment design makes it a practical solution for healthcare professionals seeking added protection during radiation-intensive procedures.

The AxiShield is offered in Axion Core™ 3000 with 0.50 mm Pb lead equivalency. It is available exclusively as an add-on and must be purchased with a lead apron at the time of order. Each AxiShield is color-matched to the lead apron it is ordered with.

✓2-Year Warranty – Radiation protection apparel is covered against manufacturing defects.

Enhance your radiation protection with the Phillips Safety Radiation Apron Sleeve, designed to provide additional shielding for the upper arm area. This sleeve securely attaches to your apron using durable snap fasteners, ensuring a comfortable and stable fit during procedures.

For proper alignment and snap placement, the sleeve must be ordered at the same time as your apron. Each sleeve is custom made to match the specific apron style and color you select, ensuring a seamless, professional appearance.

Available in .25 mm, .35 mm, and .50 mm lead equivalencies, the apron sleeve offers the same high-quality protection as your apron, minimizing radiation exposure to the upper arms. Whether you choose lightweight lead, lead-free, or Axion Core™ materials, your sleeve will be manufactured to match your apron’s core composition and finish.

Key Features:

1. Attaches securely to apron with snap fasteners
2. Custom made to match your apron’s material and color
3. Must be ordered with the apron for proper snap placement
4. Available in .25, .35, and .50 mm Pb equivalencies
5. Compatible with lightweight lead, lead-free, and Axion Core™ core materials

Ideal for medical professionals seeking complete radiation protection and consistent coverage without compromising mobility or comfort. For more options, check out our Lead Aprons collection.

✓2-Year Warranty – Radiation protection apparel is covered against manufacturing defects.

Phillips Safety Universal Apron Suspenders provide additional comfort and support while wearing lead apron skirts during extended procedures. Made from a durable woven material and attachable with alligator clips, these suspenders help redistribute weight from the hips and lower back to the shoulders, helping reduce fatigue during long hours of wear.

The adjustable strap design allows users to customize the fit for enhanced comfort and stability, while the reinforced attachment points provide dependable support. Compatible with select Phillips Safety lead apron skirts, these lightweight black suspenders are an ideal accessory for improving everyday radiation protection wear.

The Button Apron Suspenders are designed to distribute weight more evenly across the shoulders and hips, reducing lower back strain and fatigue while improving overall stability. Permanently sewn onto compatible lead apron skirts, they provide enhanced comfort and support during extended procedures.

Made from a durable woven material, the adjustable straps allow for a secure, personalized fit and help keep the skirt properly positioned throughout the day. As a permanently integrated feature, these lightweight black suspenders deliver improved stability and a more ergonomic experience during everyday radiation protection wear.

The Radiation Hat with Velcro Closure provides dependable protection against scattered radiation in medical and industrial environments. Designed for comfort during extended wear, it features an adjustable Velcro closure that ensures a secure, comfortable fit. The hat is available in four core protective materials—Lightweight Lead, Axion Core™ 1000, Axion Core™ 2000, and Axion Core™ 3000—with lead equivalencies of 0.25mm Pb, 0.35mm Pb, or 0.50mm Pb to suit varying protection needs.

This Radiation Hat is offered in five standard sizes, ranging from Small to 2XL, with custom sizing available. It can be manufactured with your choice of four outer materials—Nylon, Ripstop, Polytron, or PVC EasyClean—and is available in a wide range of colors and binding options. For more options, check out our Radiation Hats collection.

✓2-Year Warranty – Radiation protection apparel is covered against manufacturing defects.

The Lumbar Belt is designed to provide additional lower back support and improved comfort while wearing radiation protection garments during long procedures. When worn with the vest portion of the Vest and Skirt Apron or the Reverse Vest and Skirt Apron, the Lumbar Belt helps shift weight away from the shoulders to reduce strain and fatigue throughout the day.

Built for durability, it integrates seamlessly with compatible Phillips Safety lead aprons to enhance overall fit and wearability. Its adjustable design creates a secure, supportive fit while allowing flexibility and ease of movement during daily clinical use.

Anti-reflective (AR) coatings reduce glare, enhance visual clarity, minimize reflections and help alleviate eye strain. They’re ideal for anyone working with computers or spending time around artificial lighting. Always clean lenses while wet to maintain their clarity and longevity.

An anti-fog coating works by chemically affecting the adhesion of water molecules, preventing them from grouping into larger clusters that can impair vision.  They’re ideal for anyone who wears surgical masks, moves between temperature-controlled rooms, or works in high stress environments. Always clean lenses while wet to maintain their clarity and longevity.