Post: How to Clean Laser Safety Glasses

How to Clean Laser Safety Glasses

SHOP CLEANING PRODUCTS
SHOP CLEANING PRODUCTS
SHOP CLEANING PRODUCTS

Laser safety glasses are essential for protecting your eyes from harmful laser radiation, but to ensure their effectiveness and longevity, they must be properly maintained. Cleaning your laser safety glasses regularly is crucial, as dust, smudges, and oils can accumulate on the lenses, affecting visibility and potentially compromising their protective capabilities. Here’s a simple, effective way to clean your laser safety glasses to keep them in top condition.

STEP BY STEP GUIDE

TO CLEANING LASER SAFETY GLASSES

1: Wet the Glasses Under Running Water:

Start by rinsing your laser safety glasses under lukewarm running water. This helps to remove any loose dust or particles that could scratch the lenses when you clean them. Ensure the water pressure is gentle to avoid damaging the lenses.

2: Apply Dish Soap:

Once the glasses are wet, apply a small drop of mild dish soap to the lenses. Use your fingertips to gently rub the soap into the lenses, cleaning off any oils, fingerprints, or grime that may have built up during use. Be sure to cover both sides of the lenses.

3: Gently Clean with Your Hands:

Using your hands, gently work the soap across the surface of the lenses. Avoid using any rough materials or scrubbing pads, as these could damage the special coatings on the laser safety glasses. Focus on removing any smudges or stubborn spots, and be thorough but gentle.

Cleaning-Cloth_Phillips-Safety_Blog-Banner

4: Rinse Thoroughly:

After cleaning with the soap, rinse the glasses thoroughly under running water to remove any soap residue. Make sure the lenses are completely clear of soap before proceeding to the drying step.

5: Pat Dry with a Cleaning Cloth:

Use a microfiber cleaning cloth to gently pat the glasses dry. Avoid using rough towels or tissues, as these can leave lint or cause scratches on the lenses. Patting the glasses dry helps prevent streaks and ensures that no water spots form on the lenses.

6: Let the Glasses Air Dry:

Once you’ve patted the glasses dry, allow them to air dry for a few minutes. This ensures that any remaining moisture evaporates, leaving the lenses clean and streak-free. Avoid placing the glasses in direct sunlight to dry, as the heat could affect the coatings.

WHY PROPER CLEANING IS IMPORTANT

Regularly cleaning your laser safety glasses not only improves visibility but also ensures that the protective coatings remain intact. Scratches or residue buildup on the lenses can interfere with the glasses’ ability to filter laser light effectively, potentially putting your eyes at risk. Proper maintenance extends the life of your glasses and keeps them functioning at their best.

CONCLUSION

Cleaning your laser safety glasses is a simple process, but it’s important to do it right. By rinsing them under water, using mild dish soap, patting them dry with a microfiber cloth, and letting them air dry, you can maintain their clarity and effectiveness for longer. Make sure to clean your glasses regularly to keep them free from smudges and debris, and always handle them with care to preserve their protective coatings.

For more information on laser safety glasses or to explore our wide range of protective eyewear, visit Phillips Safety today!

If you still aren’t sure which products are right for you, it’s a good idea to give us a call at 1-866-575-1307 or talk to us through our chat or e-mail us at service@phillips-safety.com

Our experts will be able to tell you what you need for your application.

SHOP CLEANING PRODUCTS

CONTACT OUR CUSTOMER SERVICE

  • +1 866 575 1307 | FAX 732 356 7127

M-F | 9am – 6pm EST

design-logo
PRODUCTS
COMPANY
CUSTOMER SUPPORT

STAY INFORMED. SIGN UP FOR THE Phillips Safety NEWSLETTER

Become a Distributor

Volume Discount